Prototyping > Prices > Mini@sic prices
2010 mini@sic Europractice MPW runs – Pricelist
Accessible for universities, research institutes
Prices and conditions may change at any time without prior notice


NON-EUROPEAN price applies to all non-European (not belonging to the countries of EUROPEAN price) universities and research institutes who submit designs for educational or publicly funded research use only

EUROPEAN price only applies to all EUROPRACTICE registered (who paid their annual full membership fee) Academic and Research Members from all 27 EU countries and Norway, Iceland, Liechtenstein, Israel, Croatia, Switzerland, Turkey who submit designs for educational or publicly funded research use only.  They have special discounted prices thanks to special grant through the EU-Project EUROPRACTICE IC3 in the 6th Framework.

Prices are given for the delivery of unpackaged, untested prototypes.  Encapsulation and testing will be charged separately.


Number of prototypes
AMIS > 20 samples
Austriamicrosystems : 30 samples
IHP and LFoundry : 40 samples
UMC : >20 samples
TSMC : >20 samples

If you need more prototype samples, please ask for a quotation


Plots
You can order plots of your designs
-          first plot costs 50 euro
-          next plots cost 20 euro each


Packaging : see separate prices and available packages


ALL PRICES IN EURO
OnSemi (formerly AMIS)NON-EUROPEAN
Price/mm2
EUROPEAN
Price/mm2
AMIS 0.7µ C07M-D 2M/1P360 2320 1
AMIS 0.7µ C07M-A 2M/1P/PdiffC/HR400 2360 1
AMIS 0.5µ C05M-D 3M/1P420 2370 1
AMIS 0.5µ C05M-A 3M/2P/HR480 2430 1
AMIS 0.35µ C035M-D 5M/1P620 2570 1
AMIS 0.35µ C035M-A 5M/2P/HR680 2630 1
AMIS 0.35µ C035U 4M (default) including analog options720 2670 1
AMIS 0.35µ C035U 3M (optional) including analog options700 2650 1
AMIS 0.35µ C035U 5M (optional) including analog options800 2750 1
AMIS 0.7µ C07M-I2T100 100 V - 2M550 2500 1
AMIS 0.7µ C07M-I2T100 100 V - 3M600 2550 1
AMIS 0.7μ C07M-I2T30 30 V - 2M440 2390 1
AMIS 0.7μ C07M-I2T30E 30 V - 2M500 2450 1
AMIS 0.35µ C035 - I3T80U 80 V 3M850 2800 1
AMIS 0.35µ C035 - I3T80U 80 V 4M990 2940 1
AMIS 0.35µ C035 - I3T80U 80 V 5M1145 21075 1
AMIS 0.35µ C035 - I3T50 50 V 3M850 2800 1
AMIS 0.35µ C035 - I3T50 50 V 4M990 2940 1
AMIS 0.35µ C035 - I3T50 50 V 5M1145 21075 1
AMIS 0.35µ C035 – I3T25 3.3/25 V 3M (optional)750 2700 1
AMIS 0.35µ C035 – I3T25 3.3/25 V 4M (default)770 2720 1
AMIS 0.35µ C035 – I3T25 3.3/25 V 5M (optional)850 2800 1
   
austriamicrosystemsNON-EUROPEAN
Price/mm2
EUROPEAN
Price/mm2
austriamicrosystems 0.35µ CMOS C35B3C3 3M/2P/HR/5V IO720 3580 4
austriamicrosystems 0.35µ CMOS C35B4C3 4M/2P/HR/5V IO720 3580 4
austriamicrosystems 0.35µ CMOS C35OPTO 4M/2P/5V IO850 3700 4
austriamicrosystems 0.35µ HV CMOS H35 50V 3M1000 2800 & 900 9
austriamicrosystems 0.35µ HV CMOS H35 50V 4M1000 2800 & 900 9
austriamicrosystems 0.35µ SiGe-BiCMOS S35 4M/4P1000 2800 & 900 9
austriamicrosystems 0.18µ CMOS C18 6M/1P/MIM1200 21100 4
austriamicrosystems 0.18µ HV CMOS H18 50V 4M/MIM1320 21200 4
   
IHPNON-EUROPEAN
Price/mm2
EUROPEAN
Price/mm2
IHP SGB25V 0.25µ SiGe:C Ft=75GHz@BVCEO 2.4V 4M2500 51875 6
IHP SGB25V 0.25µ SiGe:C Ft=75GHz@BVCEO 2.4V 5M2700 52025 6
IHP SGB25VGOD 0.25µ SiGe:C Ft=75GHz@BVCEO 2.4V+RF HV-LDMOS GOD-Module 22V3150 52362 6
IHP SG25H1 0.25µ SiGe:C Ft/Fmax=180GHz/220GHz 5M/MIM7100 55325 6
IHP SG25H3P 0.25µ complementary SiGe:C Ft/Fmax (npn)110/180GHz/ (pnp)90/120GHz 5M/MIM6200 54650 6
IHP SG25H3 0.25µ SiGe:C Ft/Fmax= 110/180GHz 5M/MIM4000 53000 6
IHP SG13B SiGe:C Bipolar/Analog Ft/Fmax= 250/300GHz 5M/MIM7200 55400 6
IHP SG13S SiGe:C Bipolar/Analog/CMOS Ft/Fmax= 250/300GHz 7M/MIM7900 55925 6
IHP SG13C SiGe:C CMOS 7M/MIM4500 53375 6
Bumping IHP TechnologiesOne-off fee of 3000 10One-off fee of 2000 10
   
LfoundryNON-EUROPEAN
Price/block
EUROPEAN
Price/block
Lfoundry LF150 0.15µ CMOS all technologies900 2595 & 850 11
   
TSMCNON-EUROPEAN
Price/block
EUROPEAN
Price/block
TSMC 90nm CMOS General LP MS RF18270 87500 8
TSMC 65nm CMOS Low Power Mixed-Signal/RF25000 810000 12  & 15000 13
   
UMCNON-EUROPEAN
Price/block
EUROPEAN
Price/block
UMC L180 1P6M MM/RFCMOS2400 71800 7
UMC L130E 1P8M MM/RFCMOS5000 73000 7
UMC L90N Mixed-Mode/RF - 1P9M2T1F - 1.0V/2.5V15750 85000 8

Notes
1)Price = area (mm2) * price/mm2 with min. fabrication cost equivalent to 2 mm2
2)Price = area (mm2) * price/mm2 with min. fabrication cost equivalent to 4 mm2
3)Price = area (mm2) * price/mm2 with min. fabrication cost equivalent to 5 mm2
4)Price = area (mm2) * price/mm2 with min. fabrication cost equivalent to 3 mm2
5)Price = area (mm2) * price/mm2 with min. fabrication cost equivalent to 1 mm2
6)Price = area (mm2) * price/mm2 with min. fabrication cost equivalent to 0.5 mm2
7)Price = per block of 1525x1525 microns needed to fit the design in
8)Price = per block of 1875x1875 microns needed to fit the design in
9)Minimum charged area = 2 mm2
For area ≤ 7 mm2, Price = area (mm2) * 800
For area > 7 mm2, Price = 5,600 + (area-7) * 900
10)Price = per submitted design to be bumped (no size limit, limited to 200 bumps)
11)Minimum charged area = 3 mm2
For area ≤ 5 mm2, Price = area (mm2) * 595
For area > 5 mm2, Price = 2,975 + (area-5) * 850
12)For European universities : A**** membership
Price = per block of 1875x1875 microns needed to fit the design in
13)For European research institutes : R**** membership
Price = per block of 1875x1875 microns needed to fit the design in

General rules that apply to
each MPW run supported by the mini@sic Program :
·         Users must register their design for prototyping on one of the MPW runs under the mini@sic Program
·         Registration can be done via the web pages www.europractice-ic.com under the mini@sic Program
·         A priority list will be generated per MPW run according to user registration date and acceptance by EUROPRACTICE
·         Users paying the normal fees (for normal MPW participation with normal minimum charges) have first priority, then mini@sic designs will be added from this priority list according to priority and availability of free space on the masks.
·         EUROPRACTICE can not give any commitment for final acceptance for prototyping until tape-out of the MPW run


UMC 0.18 and 0.13µ mini@sic rules
In this case however the standard block of 5x5 mm is subdivided into 9 regular square sub-blocks.  Users under the mini@sic program can submit single or multiple of sub-blocks depending on the size of their design.
-          single sub-block : design may not be larger than 1525 x 1525 µm
-          2 sub-blocks : design may not be larger than 3240 x 1525 µm
-          3 sub-blocks : design may not be larger than 4960 x 1525 µm
-          4 sub-blocks : design may not be larger than 3240 x 3240 µm
-          6 sub-blocks : design may not be larger than 4960 x 3240 µm

The price for prototyping is the number of sub-blocks your design needs to fit in, multiplied with the sub-block price.


UMC 90nm mini@sic rules
In this case however the standard block of 4x4 mm is subdivided into 4 regular square sub-blocks.  Users under the mini@sic program can submit single or multiple of sub-blocks depending on the size of their design.
-          single sub-block : design may not be larger than 1875 x 1875 µm
-          2 sub-blocks : design may not be larger than 3950 x 1875 µm

The price for prototyping is the number of sub-blocks your design needs to fit in, multiplied with the sub-block price.


TSMC 90nm mini@sic rules
In this case however the standard block of 4x4 mm is subdivided into 4 regular square sub-blocks.  Users under the mini@sic program can submit single or multiple of sub-blocks depending on the size of their design.
-          single sub-block : design may not be larger than 1875 x 1875 µm
-          2 sub-blocks : design may not be larger than 3950 x 1875 µm

The price for prototyping is the number of sub-blocks your design needs to fit in, multiplied with the sub-block price.


TSMC 65nm mini@sic rules
Users under the mini@sic program can submit only single or double blocks depending on the size of their design.
-          single sub-block : design may not be larger than 1875 x 1875 µm
-          double-blocks : design may not be larger than 3950 x 1875 µm

The price for prototyping is the number of sub-blocks your design needs to fit in, multiplied with the sub-block price. 
All rights reserved